最新新闻

首页 > 最新新闻
根据季节温度不同护坡钢模具脱模也不同
发布人:管理员   发布时间:2020-10-6


护坡钢模具选用钢板加工定制,护坡钢模具可根据图纸定做。硬度高、抗变形能力强,可以用来生产大型水泥制品模具,一般都是应用于堤坝、铁路,高速公路两侧的地方,形状多样。
The steel mould for slope protection is made of steel plate, which can be customized according to the drawings. High hardness, strong anti deformation ability, can be used to produce large cement products mold, generally used in dikes, railways, highways on both sides of the place, shape diversity.

护坡钢模具根据季节温度的不同养护的方法也是不同的,在春夏温度比较高的季节,每天可以脱两次模,钢模具和塑料模具不同的是密封性不是太好,所以水分很容易流失。
According to the different seasonal temperature, the maintenance method of slope protection steel mold is also different. In the high temperature season in spring and summer, the mold can be removed twice a day. The difference between steel mold and plastic mold is that the sealing property is not very good, so the moisture is easy to lose.

     

如果是制砖机生产出来的水泥制品,则需要隔断时间洒一次水,以防干燥引起爆裂,护坡钢模具生产出来的制品则不用,秋冬季节温度较低,适合每天脱一次模,如果天气太寒冷,需要把模具放置在室内养护,以防冻裂,损坏模具,影响下次使用。
If it is cement products produced by brick making machine, it is necessary to sprinkle water once every time to prevent cracking caused by drying. The products produced by slope protection steel mould are not needed. The temperature in autumn and winter is low, which is suitable for mold removal once a day. If the weather is too cold, the mold should be placed in the room for maintenance, so as to prevent cracking, damage the mold and affect the next use.


保定永久护坡钢模具厂是一家从事钢模具制造多年的大型厂家之一,钢模具随着时间及自然因素的影响会发生老化等现象,那如何避免及有效的控制呢?
Baoding permanent road stone steel mold factory is one of the large-scale manufacturers engaged in steel mold manufacturing for many years. With the influence of time and natural factors, steel mold will age. How to avoid and effectively control it?

 

上一篇:没有了